Accessories
4.8 Communication and system integration
3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01
333
Commissioning and testing of electronic trip units using powerconfig
powerconfig
powerconfig has the following functions in relation to 3VA UL molded case circuit breakers:
● Parameterization of 3VA UL ETUs and other 3VA UL components
● Testing of 3VA UL
● Commissioning of 3VA UL
● Statistical analysis of 3VA UL
● Readout of measured variables such as energy, current, voltage and power from the
3VA UL molded case circuit breakers
● Readout of minimum and maximum values from 3VA UL molded case circuit breakers
● Diagnostics of 3VA UL
The PC on which powerconfig runs is connected to the 3VA UL molded case circuit breaker
by means of the COM800/COM100 breaker data server, optionally with modules or the
TD500 test device.
The TD500 test device is required in order to perform function tests. You can find information
on the TD500 test device in chapter The TD500 test device (Page 364).
To Next Page
Loading...
