Accessories
4.5 Manual operators
3VA molded case circuit breakers with UL and IEC certification
284 Manual, 01/2019, L1V30435333-01
Locking at the masking plate of the side wall with cylinder lock (Kaba)
The side wall mounted rotary operator can be locked at the side wall with a cylinder lock
(type Kaba).
The cylinder lock can
be used for locking in the ON (I) position.
The cylinder lock (type Kaba) for the masking plate must be ordered separately.
Locking, blocking and interlocking at the rotary operator
Locking at the rotary operator is possible with up to three padlocks with a diameter of
3/16" - 5/16" / 5 - 8 mm and with a cylinder lock (type Ronis). Interlocking is only possible
with cylinder locks (type Ronis).
In addition, the side wall mounted rotary drive can be locked at the masking plate of the side
wall additionally with cylinder locks (type Kaba).
Padlocks and cylinder locks are not included in the scope of supply of manual rotary
operators.
All rotary operators have a mechanism for padlocks. This can be pulled out from the rotary
operator.
To Next Page
Loading...
