Accessories
4.7 Locking and interlocking
3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01
317
A Bowden cable must be installed in addition to the sliding bar modules. This cable prevents
the slides from releasing more than one molded case circuit breaker at any one time. This
ensures that only one 3VA UL molded case circuit breaker at a time can be actuated and
only
molded case circuit breaker can be in the ON (I) position.
3VA5 125 molded case circuit breaker, blocked by slide
3VA6 250 molded case circuit breaker, released by slide
For installation instructions, please refer to operating instructions "Sliding bar modules".
The following lengths of Bowden cable can be ordered:
● 23.62" / 0.6 m
● 39.37" / 1.0 m
● 59.05" / 1.5 m
To Next Page
Loading...
