Accessories
4.11 Test devices
3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01
367
Interfaces of the TD500 test device
The diagram below shows the physical interfaces of the TD500 test device.
Top of unit: Connection to 3VA UL molded case circuit breaker
Bottom of unit on right: 24 V DC supply
Bottom of unit on left: Connection to PC
Compatibility with molded case circuit breakers
The TD500 test device can be connected to all 3VA6 molded case circuit breakers with the
ETUs 3-series, 5-series and 8-series. The connecting cable from the test device is inserted
in the test socket of the ETU.
To Next Page
Loading...
