Appendix
A.1 Standards and approvals
3VA molded case circuit breakers with UL and IEC certification
466 Manual, 01/2019, L1V30435333-01
IEC / EN 60947-2, An-
nex H
"Test sequence for circuit-breakers for IT systems"
"Circuit-breakers for IT systems"
IEC / EN 60947-3 /
DIN EN 60947-3
(VDE 0660-107)
Low-voltage switchgear and controlgear – Switches, disconnectors,
switch-disconnectors and fuse-combination units
IEC 60947-4-1 /
DIN EN 60947-4-1
(VDE 0660-102)
Low-voltage switchgear and controlgear: Contactors and motor-starters
IEC / EN 61000-4-2 Electrostatic discharge immunity test
IEC / EN 61000-4-3 Radiated, radio-frequency, electromagnetic field immunity test
IEC / EN 61000-4-4 Electrical fast transient/burst immunity test
IEC / EN 61000-4-5 Surge immunity test
IEC / EN 61000-4-6 Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61557-12 Electrical safety in low voltage distribution systems up to 1000 V a.c. and
1500 V d.c. - Equipment for testing, measuring or monitoring of protective
measures - Part 12: Performance measuring and monitoring devices
(PMD)
UL 489 UL Standard for Safety for Molded-Case Circuit Breakers, Molded-Case
Switches and Circuit-Breaker Enclosures
UL 1053 Standard For Safety For Ground-Fault Sensing and Relaying Equipment
RoHS Directive 2002/95/EC (Directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment).
National standards that the 3VA UL molded case circuit breakers meet
You will find the national standards that the 3VA UL molded case circuit breakers meet at
(http://www.siemens.com/3VA-Documentation
)
Certification by marine classification societies
You will find the marine approvals that the 3VA UL molded case circuit breakers meet at
(http://www.siemens.com/3VA-Documentation
)
Disposal of waste electronic equipment
Waste electronic equipment must not be disposed of as unsorted municipal waste, e.g.
household waste. When disposing of waste electronic equipment, the current local
national/international regulations must be observed.
To Next Page
Loading...
