EasyManua.ls Logo

Siemens SICAM Q100 - Load-Profile Determination

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
80 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
2.2.7.53 Registers 15001 to 15378: Harmonics, Power – Apparent Power Values (Read
Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Calculation period: 10/12 cycle (50Hz/60Hz)
Network types: Only 1P2W, 3P4W_bal, 3P4W_unb_PN is available.
Data type: Measured value
Table 2-63 Registers 15001 to 15378: Harmonics, Power - Apparent Power Values
Register Type of Information Remark Unit
15001 HP_Sa-1
Harmonic (apparent power), a-N
(fundamental)
° (degree)
15003 to
15126
HP_Sa-x
(x = 2 to 63)
Harmonic (apparent power), a-N
(2 bytes for each register)
° (degree)
15127 HP_Sb-1
Harmonic (apparent power), b-N
(fundamental)
° (degree)
15129 to
15252
HP_Sb-x
(x = 2 to 63)
Harmonic (apparent power), b-N
(2 bytes for each register)
° (degree)
15253 HP_Sc-1
Harmonic (apparent power), c-N
(fundamental)
° (degree)
15255 to
15378
HP_Sc-x
(x = 2 to 63)
Harmonic (apparent power), c-N
(2 bytes for each register)
° (degree)
SYS_SICAM_Q100_US.book Page 80 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals