FM 456-2 Functions and Technical Data
4-12
FM 456-2 Application Function Module Installation, Hardware, and Startup
C79000-G7076-C458-01
4.10 BIOS Setup
The BIOS setup for the FM 456-2 offers the same functions as for the CPU 488-3
and the CPU 486-3. Thus the descriptions in the chapter “CPUs for the M7-400,
the BIOS setup” of the
reference manual /1/
are also valid for the FM 456-2.
This sections shows only the BIOS setup windows which differ from those of the
CPUs.
Cold Start
After switch-on or cold starting the application function module, the BIOS (Basic
Input Output System) starts a ”Power On Self Test” (POST) and outputs the
results in the POST window.
PowerBIOS Version 1.00
Copyright (C) 1984 – 1996 Award Software Intl., Inc.
03/13/96 – Intel–82430HX-3A59I000 01 0000
Siemens AG FM456-2 M7-BIOS A2.11
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CPU Type Pentium 120MHz
Math CoProcessor Internal
Base Memory 640 Kb
Extended Memory 15360 Kb
BIOS Shadow RAM Enabled
Video Shadow RAM Enabled
PS2 Mouse Disabled
Floppy Drives 1 Found
Hard Drives IBM–DBOA–2540
Serial Ports 2 Found
Parallel Ports 1 Found
Testing Base Memory 640 Kb
Testing Extended Memory 15360 Kb
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Press CTRL–ALT–ESC to enter setup
Warm Start
The following window appears after a warm start of the FM 456-2 with MS-DOS.
This indicates an accelerated system power up.
PowerBIOS Version 1.00
Copyright (C) 1984 – 1996 Award Software Intl., Inc.
03/13/96 – Intel–82430HX-3A59I000 01 0000
Siemens AG FM456-2 M7-BIOS A2.11
Press CTRL-ALT-ESC to enter setup
To Next Page
Loading...
