Siemens SIMATIC FM 456-2 - 5 Ordering Information

Ordering Information
5-3
FM 456-2 Application Function Module Installation, Hardware, and Startup
C79000-G7076-C458-01
5.4 Memory Card
Table 5-4 lists all the memory cards that can be used with M7-400 application
function modules.
Table 5-4 Order Numbers for Memory Card
Description
Order Number
Memory Card, flash-EPROM, 5 V, 4 Mbytes 6ES7 952-1KM00-0AA0
Memory Card, flash-EPROM, 5 V, 8 Mbytes 6ES7 952-1KP00-0AA0
Memory Card, flash-EPROM, 5 V, 16 Mbytes 6ES7 952-1KS00-0AA0
5.5 Connecting Cables
Table 5-5 lists the connecting cables.
Table 5-5 Order Numbers for Connecting Cables
Description
Order Number
V.24 cables (RS232, ”Null-Modem”), 10 m (33 ft.)
9-pin Sub-D female connectors at both ends
9AB4 173-2BN10-0CA0
Printer connecting cable for
S Serial interface (COM, 10 m (33 ft.))
S Parallel interface (Centronics)
9AB4 173-2BN10-0CA0
9API 901-0AL00
5.6 Spare Parts and Accessories
Table 5-6 lists spare parts and accessories.
Table 5-6 Order Numbers for Spare Parts and Accessories
Description
Order Number
Key for FM 456 (mode switch) 6ES7 911-0AA00-0AA0
12 module covers 6ES7 398-0BA00-0AA0
6 connecting clips 6ES7 498-6BA00-0AA0