Siemens SIMATIC HMI KTP1200 Basic DP - 5.15 Displaying information about the HMI device

Configuring the device
5.15 Displaying information about the HMI device
Basic Panels 2nd Generation
62 Operating Instructions, 10/2016, A5E33293231-AB
5.15
Displaying information about the HMI device
1.
Touch the "System Control/Info" icon.
2.
Shift the bookmarks up in the
navigation area.
3.
Change to the "System Info" tab.
The "System Info" tab is used to
display specific information on the
HMI device. You will need this
information when contacting
Technical Support.
– "Device": HMI device name
– "Image version": Version of
the HMI device image
– "Bootloader version": Version
of the bootloader
– "Bootloader release date":
Release date of the boot loader
– "PN X1": MAC address, only for
HMI devices with PROFINET
interface