Siemens SIMATIC HMI OP3 - Page 116

E-4
Operator Panel OP3
Edition 11/99
ContentTarget GroupDocumentation
Communication
User’s Guide
Programmers Provides information on connecting text-based and graphics
displays to the following PLCs:
• SIMATIC S5
• SIMATIC S7
• SIMATIC 500/505
• drivers for other PLCs
This documentation describes the
• configuration and parameters required for connecting the
devices to the PLC and the network
• user data areas used for exchanging data between
operating unit and PLC.
Communication for
Windows-based Systems
User’s Guide
Programmers Provides information on connecting Windows-based systems
to the following PLCs:
• SIMATIC S5
• SIMATIC S7
• SIMATIC 505
• OPC
• Allen Bradley PLC-5/SLC 500
• Mitsubishi FX
• Telemecanique TSX
This documentation describes the
• configuration and parameters required for connecting the
devices to the PLC and the network
• user data areas used for exchanging data between
operating unit and PLC.
Other PLCs
Online Help
Programmers Provides information on connecting devices to PLCs, such
as:
• OPC
• Mitsubishi
• Allen Bradley
• Telemecanique
• Modicon
• Omron
• SIMATIC WinAC
When the drives are installed, the relevant Online Help is
installed at the same time.
ProAgent for OP
User’s Guide
Configurers Provides the following information about the ProAgent
optional package (process diagnosis) for OPs
• configuring system-specific process diagnosis
• detecting, locating the cause of and eliminating process
errors,
• customizing standard diagnostic screens supplied with
the software.