B-14
Equipment
Manual OP7, OP17
Release 04/99
Remedy:CauseMes-
sage
661 On
process screen: recipe setpoint or previous
value configured in recipe: field is neither recipe
setpoint or previous value.
Change field type or remove field
and retransfer configuration
662
Invalid destination configured for return reference
in screen.
Change configuration and retransfer
.
663
Data record memory full (during startup)
664
Standard data records for the configured recipes
require more than 20 Kbytes. Unit switches to
COM TEXT mode.
Configure fewer or smaller recipes.
665
Configuration of interfaces incorrect, printer/PLC
interfaces have same physical characteristics.
Check interface parameters.
667
Configuration error:
Variable x:
1 Data type is not DB
2 DB number is greater than 15
3 DB length is greater than 1024
4 DW is in data block header
5 Actual value not in send block
6 Setpoint not in receive block
7 Setpoint/actual value not in receive block
8 Initial value not in send block
9 Data type is not DB
10 DB number is greater than 15
11 DB length is greater than 1024
12 DW is in data block header
13 Area is in wrong DB
14 Sum of data blocks too great
x = 1..8: Change the configuration of the
process link and retransfer.
x = 9..13:Change configuration of area
pointer and retransfer
x = 14: Restrict configuration and re-
transfer.
668 Incorrect
configuration.
Meaning of variables:
1:
Incompatible PLC types configured
2:
No PLC configured
3:
Incorrect baud rate configured
Change configuration and retransfer
.
669 T
oo many actual values (> 512) have been confi
-
gured for cyclic reading in a screen/variable.
670 T
oo many variables requested simultaneously
.
Lengthen standard clock pulse or
configure fewer variables on screen.
To Next Page
Loading...
Need help?
General
