Siemens SIMATIC IPC BX-39A Manual

Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
8 Operating Instructions, 01/2023, A5E51110693-AA
Using the firmware selection menu
1
1.1 Open firmware selection menu
Procedure
1. Switch on the device or restart the device.
Note
The following message appears briefly after the device is switched on:
Press ESC for boot options
2. Immediately after switching on the device, press the <Esc> button and hold it down.
Note
Windows®10 operating systems: Alternative procedure for opening the firmware
selection menu
If, after starting the device, the firmware
selection menu does not open with the <Esc>
key, follow these steps:
•
Start Windows®10.
•
Press the <Shift> key and keep it pressed.
•
Select "Restart."
The "Choose an option" window opens.
•
Select the "Troubleshoot" option.
•
Select the "Advanced Options" option.
•
Select "UEFI Firmware Settings".
•
Click "Restart".
Result
The "Main Page" with the Firmware selection menu options (Page 9) is open.

Siemens SIMATIC IPC BX-39A Specifications

General

Brand	Siemens
Model	SIMATIC IPC BX-39A
Category	Industrial PC
Language	English