Siemens SIMATIC NET CP 1604 - Start Page

Operating hardware
4.2 Web server
CP 1604 / CP 1616
48 Operating Instructions, 02/2017, C70000-G8976-C218-08
4.2.6.2
Start page
Start page
The Start page provides you with information as shown in the following figure. The image of
the CP 1616 indicates its current status regarding group errors and bus errors at the time the
data was queried. The display of the port LEDs is static.
Figure 4-5 Start page
"General"
"General" contains information about the CP 1616 whose Web server you are currently
connected to.
"Status"
"Status" contains information about the CP 1616 at the time of the query.
Reference
For information on http connections, see the section "Settings in HW Config, "Web" tab
(Page 42)".