Operating hardware
4.2 Web server
CP 1604 / CP 1616
62 Operating Instructions, 02/2017, C70000-G8976-C218-08
Meaning of the colored connections in the set/actual topology:
green
The current actual connection corresponds to the configured
set connection.
Detected connections
red The current actual connection does not correspond to the
configured set connection (for example port swapped over).
-
yellow The connection cannot be diagnosed. Causes:
• Communication with a device is disrupted (for example
cable unplugged),
• The connection is a connection to a passive component,
• The connection is a connection to devices/PROFINET
devices of a different IO controller or IO subsystem.
-
① Configured and reachable PROFINET nodes
Configured and reachable PROFINET nodes are displayed in dark gray. The connections
show the ports via which the PROFINET nodes of a station are connected.
② Configured but unreachable PROFINET nodes
The configured but unreachable PROFINET nodes are displayed pink with a red border (for
example device failed, cable unplugged)
All deactivated, configured PROFINET nodes are displayed light gray.
Swapped over ports are marked red in the set topology view. The actually connected ports
are displayed in the actual topology and the configured set connection is shown in the set
topology.
To Next Page
Loading...
Need help?
General
