Siemens SIMATIC NET SCALANCE S615 - Declaration of Conformity; The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016

Applied standard:
6 EN IEC 63000
Technical documentation for the assessment of electrical and electronic products
with respect to restriction of hazardous substances
10.2.4 Products
UK conformity
The standards that apply to the product are described in The Equipment and Protective Systems
Intended for use in Potentially Explosive Atmospheres Regulations 2016 (Page73), The
Electromagnetic Compatibility Regulations 2016 (Page73) and The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(Page73).
Product Standards
SCALANCE S615 1, 2
1)
, 3
1)
, 4, 5, 6
SCALANCE S615 EEC 4, 5, 6
1)
According to rating plate
10.3 General approvals
Approvals issued
Note
Issued approvals on the type plate of the device
The speci󹪝ed approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
Approvals
10.3General approvals
SCALANCE S615
74 Operating Instructions, 05/2023, C79000-G8976-C389-08