Siemens SIMATIC NET SCALANCE S615 - The Electromagnetic Compatibility Regulations 2016; The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

ATEX, IECEx, UKEX and CCC Ex certi󹪝cation
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area".
You will 󹪝nd this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support (https://
support.industry.siemens.com/cs/ww/en/view/78381013).
Enter the document identi󹪝cation number "C234" as the search term.
The markings of the electrical devices are:
 II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0025 X
DEKRA 21UKEX0001 X
IECEx DEK 18.0017X
 Importer UK:
Siemens plc,
Manchester
M20 2UR
 (Ex ec IIC T4 Gc, not on the nameplate)
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.3
• EN IEC/IEC 60079-0, GB 3836.1
You will 󹪝nd the current versions of the standards in the currently valid certi󹪝cates.
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standards:
• EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
You will 󹪝nd the current versions of the standards in the currently valid RCM SDoCs (Self-
Declaration of Conformity).
Approvals
10.3General approvals
SCALANCE S615
Operating Instructions, 05/2023, C79000-G8976-C389-08 75