Siemens SIMATIC NET SCALANCE S615 - SET Button

The following PLUG types are available:
• C-PLUG: The removable data storage medium only saves the con󹪝guration data of the device.
• KEY-PLUG: In addition to the con󹪝guration data, the removable data storage medium
contains a license with which speci󹪝c functions can be enabled, e.g. SINEMA RC.
• CLP (Con󹪝guration License PLUG)
The SCALANCE CLP is a removable data storage medium for the storage and securing of
con󹪝guration data that can be used in all SCALANCE devices with CLP slot, e.g. SCALANCE
MUM85x. The SCALANCE CLP is used to transfer the con󹪝guration of the old device to the
new device when a device is replaced. The CLP is a successor to the previously described
PLUGs. The CLP is also referred to as PLUG in the description. The PLUG is available in the
following variants:
– PLUG Con󹪝guration
– PLUG License
Position
The PLUG slot is located on the back of the device, see the Device views (Page 20) section in the
Operating Instructions of the device.
Description of the device
3.9PLUG
SCALANCE S615
28 Operating Instructions, 05/2023, C79000-G8976-C389-08