Configuring with Web Based Management
4.7 "Security" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
285
Description
The page contains the following:
• Account
Enter the name for the user. The name must meet the following conditions:
– It must be unique.
– It must be between 1 and 250 characters long.
Note
User name cannot be changed
After creating a user, the user name can no longer be modified.
If a user name needs to be changed, the user must be deleted and a new user
created.
You can configure the device with this user name.
When you log in for the first time or log in after a "Restore Factory Defaults and
Restart", you are prompted to change the pre
-defined password "admin". You can
also rename the "admin" user preset in the
factory once. Afterwards, renaming
"admin" is no longer possible.
• Password Policy
Shows which password policy is being used.
– High
Password length: at least 8 characters, maximum 128 characters
At least 1 uppercase letter
At least 1 special character
At least 1 number
– Low
Password length: at least 6 characters, maximum 128 characters
You configure the password policy on the page "Security > Passwords".
• Password
Specify the password. The strength of the password depends on the set password
policy.
It must not contain the following characters: § and ß
To Next Page
Loading...
