Siemens SIMATIC NET Installation Manual

Modules
4.3Installing/Removing Line Modules
Power Consumption: 12
W
RUGGEDCOM RX1511PN LM APE1808CKP Specifications
Operating System:
Check Point GAiA™ OS
Processor: Intel x5-
E3940 1.8 GHz, 2 MB L2
Cache
RAM: 8 GB DDR3 ECC,
1600 MHz, 64-bit
Disk: 64 GB, Solid State
Networking: Intel I210,
RJ45 Gigabit Ethernet
Interface
USB: 2 x USB 3.0
Video: Intel HD Graphics
Processor, Display Port
Power Consumption: 12
W
Article Numbers
6GK6015-0AL20-0GK0
(Standard)
6GK6015-0AL20-0GK1
(Conformal Coated)
a
Maximum combined USB device power consumption is 500 mA at 5 V.
Blank Modules
RUGGEDCOM RX1500PN PS XXP Specifications
—
Article Numbers
6GK6015-0AL10-0AA0
(Standard)
6GK6015-0AL10-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN LM Blank Specifications
—
Article Numbers
6GK6015-0AL20-0AA0
(Standard)
6GK6015-0AL20-0AA1
(Conformal Coated)
4.3 Installing/Removing Line Modules
Upon installing a new line module in the device, all features associated with the
module are available in RUGGEDCOM RX1511 . For more information, refer to the
RUGGEDCOM ROX Configuration Manual for the RUGGEDCOM RX1511.
Once a line module is removed, all the features associated with the module are
hidden or disabled in RUGGEDCOM RX1511.
RUGGEDCOM RX1511
Installation Manual, 04/2021, C79000-G8976-1056-20
39

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols