i
OEM Push Button Panel Equipment Manual
Release 08/98
Preface
This equipment manual is designed to provide operators, installation personnel,
planners and system maintenance technicians with information concerning the
functionality, operation and technical configuration of Push Button Panels.
The equipment manual for the Push Button Panels OEM PP32 and
OEM PP32/OP17 is divided into the following sections:
Chapters Content
1
General description of the Push Button Panels
2 Step-by-step instructions on how to configure a Push
Button Panel
3 Detailed information on the interrelationship between the
Push Button Panel and PLC
4
Mechanical and electrical installation of the Push Button
Panels
5 - 6 Unit description of the various Push Button Panel
versions
7 Information on labelling
8 Information on spare parts
Appendices T
echnical data, system messages, hardware test
Please address technical questions to your local Siemens partners in the subsid
-
iaries and branch offices responsible for your area. Refer to Appendix D of this
equipment manual for a list of addresses.
Purpose
Organization of the
manual
Further support
To Next Page
Loading...
