2-12
OEM
Push Button Panel Equipment Manual
Release 08/98
2.3.2 Configuring Keys/LEDs When Using PROFIBUS-DP Connection
After
having loaded the GSD files in the system, as described in Chapter
2.2,
the configuration software COM-PROFIBUS (SIMATIC S5) or HW-CONFIG
(SIMATIC S7) can be used to define all the settings for the Push Button Panel.
COM-PROFIBUS Call in dialog box
Slave pr
operties by double clicking
on the PP symbol. When it appears, click on button
Configure.
HW-CONFIG Select property page Configur
e
in dialog box Object
properties.
Starting Up the Push Button Panel
To Next Page
Loading...
