Siemens SIMATIC OEM PP32 - 6 Unit Description OEM PP32;OP17

5-1
OEM Push Button Panel Equipment Manual
Release 08/98
Unit Description OEM PP32
Side viewFront view
330
295
305
320
SIMATIC OEM PP32
PP cover
Front plate
5
5
125
226
330
30
60
Frame
322
The OEM PP32 requires a mounting cut-out (WxH) of 290 mm x 318,5 mm.
Note
The installation depth of the Push Button Panel is dependent on the type of
connection cable to the PLC. It does not correspond to the outer dimensions of
the unit. Ensure the cable has a suf ficient bending radius.
Unit dimensions
Mounting cut-out
5