A-2
OEM
Push Button Panel Equipment Manual
Release 08/98
OEM PP32/OP17OEM PP32Ambient conditions
Shock loading
S Operation
S Shipping, storage
15 g/11 msec
25 g/6 msec
Vibration
S Operation
S Shipping, storage
0.075 mm (10 Hz ... 58 Hz)
1 g (58 Hz ... 500 Hz)
3.5 mm (5 Hz ... 10 Hz)
1 g (10 Hz ... 500 Hz)
Max. pressure difference (front/rear sides) 2hPa
Barometric pressure
S Operation
S Shipping, storage
706 to1030 hPa
581 to 1030 hPa
The conformity of the product described with the regulations of Directive 89/336 EEC is proved by com-
pliance with the following standards:
Interference immunity EN 50082-1 OEM PP32 OEM PP32/OP17
Static discharge (contact discharge) EN 61000-4-2 Class 3
RF irradiation EN 61000-4-3 Class 3
Pulse modulation ENV 50204 (900 MHz ”5 MHz)
RF conduction ENV 50141 Class 3
Burst interference ENV 61000-4-4 Class 3
Radio interference EN 50081-2 OEM PP32 OEM PP32/OP17
RFI suppression EN 55011 Class A
A.2 Digital inputs and outputs
24 V digital inputs OEM PP32 OEM PP32/OP17
Power supply
S Rated value
S Permissible range
S Value at t < 0.5 s
+ 24 V DC
+18.0 ... +30.0 V
35 V
Connectable Key, switch (inductive load not permissible)
Number of inputs 16
Potential isolation from internal circuitry –
Input voltage
S Rated value
S with signal “0”
S with signal “1”
24 V DC
0 ... 5 V
15 ... 30 V
Technical Data
To Next Page
Loading...
