Siemens SIMATIC RF610T ATEX - Ordering Data; Installation

Antennas
6.3 SIMATIC RF620A
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
253
6
6.3.2 Ordering data
Table 6- 10 Ordering data RF620A
Product
Article number
SIMATIC RF620A (ETSI)
6GT2812-1EA00
SIMATIC RF620A (FCC) 6GT2812-1EA01
Table 6- 11 Ordering data accessories
Product
Article number
Connecting cable between
reader and antenna
1 m (cable loss 0.5 dB)
6GT2815-0BH10
3 m (cable loss 1.0 dB) 6GT2815-0BH30
5 m, suitable for drag chains
(cable loss 1.5 dB)
6GT2815-2BH50
10 m (cable loss 2.0 dB)
6GT2815-1BN10
10 m (cable loss 4.0 dB)
6GT2815-0BN10
15 m, suitable for drag chains
(cable loss 4.0 dB)
6GT2815-2BN15
20 m (cable loss 4.0 dB)
6GT2815-0BN20
40 m (cable loss 5.0 dB)
6GT2815-0BN40
6.3.3 Installation
Two holes for M5 screws are provided for mounting the antenna. The antenna is suitable for
mounting on metallic and non-metallic surfaces.
Note
A
Achieving optimum wave propagat
ion
T
o achieve optimum wave propagation, the antenna should not be surrounded by conducti
ng
o
bjects. The area between antenna and transponder should also allow wave propagation
w
ithout interference.
Note
A
Antenna gain depends on the mounting surface
N
ote that the antenna gain depends on the material of the mounting surface. If the antenna
is
mounted on a metallic surface, the antenna gain is -5 dBi. If the antenna is mounted on a
n
on-metallic surface, the antenna gain is -10 dBi.