"SIMATIC Mobile Reader" app
5.5 "Settings" menu
Mobile reader SIMATIC RF660M
56 Operating Instructions, 02/2022, C79000-G8976-C660-01
Other
In the "Other" tab, you can configure general settings.
Figure 5-12 "Settings > Other" menu
Table 5- 11 Parameters of the "Other" menu
Slider to enable/disable the scan sound
If the function has been enabled, a signal sound is generated for each
transponder identified during a scan operation.
Slider to enable/disable the localization sound
If the function has been enabled, the distance to the transponder is reproduced
by signal sounds when transponders are located. The nearer you get to the
transponder, the higher the frequency of the signal sound becomes.
To Next Page
Loading...
