"SIMATIC Mobile Reader" app
5.5 "Settings" menu
Mobile reader SIMATIC RF660M
Operating Instructions, 02/2022, C79000-G8976-C660-01
57
when...
Slider to enable/disable the head module
If the function has been enabled, the head module is switched off automatically
as soon as the "SIMATIC Mobile Reader for RFID" app goes to the background.
This function is an energy-saving function to maximize the battery lifetime.
settings
Button for resetting the mobile reader to factory settings
With this function, the "SIMATIC Mobile Reader" app is reset to the factory
settings. The data saved on the device (e.g. log files) is not deleted in this
process. To delete this data, you need to reset the operating system or delete the
data manually.
You can reset the operating system in the system settings under "Settings >
System > Advanced > Reset options > Delete all data (factory settings)".
To Next Page
Loading...
