Parameter data records
B.1 Parameter assignment and structure of the parameter data records
Analog Input Module AI 8xU/R/RTD/TC HF (6ES7531-7PF00-0AB0)
64 Manual, 09/2016, A5E36647959-AB
Hardware interrupt limits
The values that you can set for hardware interrupts (high/low limit) must not exceed the
over/underrange of respective rated measuring range.
The following tables list the valid hardware interrupt limits. The limit values depend on the
selected measuring type and range.
Table B- 6 Limits for voltage and resistance
±25 mV, ±50 mV, ±80 mV, ±250
150 Ω, 300 Ω, 600 Ω, 6 kΩ
32510 32510 High limit
Table B- 7 Limits for thermocouple types B, C, E, and J
Table B- 8 Limits for thermocouples type K, N, R, and S
Table B- 9 Limits for thermocouple type T and TXK
To Next Page
Loading...
Need help?
General
