Expert Functions
5.2 Extending a PROFIdrive message frame
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
137
14. Switch to S7T Config and open the "Message frame configuration" of SINAMICS S120.
Note
If the window was still open, you need to close and reopen it.
15. Click "Align message frame with HW Config: Set up addresses" to complete the new
message frame configuration.
Result
The extension of the PROFIdrive message frame for the integrated inputs/outputs
is now complete.
To Next Page
Loading...
