Installing and connecting the device
3.1 Preparing for installation
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
23
3.1.5 Checking clearances
The following figure shows the clearances during mounting of the HMI devices in horizontal
and vertical format for sufficient self-ventilation of the devices:
Clearance for installation in landscape format
Clearance for installation in portrait format
Distance from wall at least 23 cm.
Ensure that the maximum ambient temperature is not exceeded when mounting the device
in a cabinet and especially in a closed enclosure.
Clearances during cleaning
Cleaning of the device must not be impeded by other components in the plant, such as
switches and signaling devices.
• Install the HMI device so that it is easily accessible for cleaning.
• Cleaning with the appropriate agents must not be impeded.
• Keep sufficient distance to other components.
• The distance of the front panel to other components should be at least 20 mm.
To Next Page
Loading...
