Technical specifications
5.7 Dimension drawings
Comfort Panels INOX PCT
44 Compact Operating Instructions, 07/2021, A5E38804191-AE
Note that the IP degree of protection and the enclosure type are only guaranteed if the
following is observed:
• The mounting gasket fits completely to the mounting cut-out, see section "Inserting the
mounting seal (Page 24)".
• The conditions for the mounting cut-out. Read the corresponding information in section
"Notes on installation (Page 22)".
• The device has been installed according to the information provided in this document.
5.7 Dimension drawings
5.7.1 7" device dimension drawing
Clamping frame
To Next Page
Loading...
