Overview
1.4 Interfaces
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
9
Rear view
See standard device, Comfort Panels operating instructions
1.4 Interfaces
Interfaces of the 7", 9" and 12" variants
The figure shows the interfaces of the following HMI devices:
• TP700 Comfort INOX PCT
• TP900 Comfort INOX PCT
• TP1200 Comfort INOX PCT
Connection for equipotential bonding (ground)
X1 PROFINET (LAN), 10/100 Mb
X80 power supply connector
X2 PROFIBUS (Sub-D RS422/485)
Additional information
Use the X1 or X60 interface to connect a configuration PC. Use the X61 / X62 interfaces to
connect peripheral devices such as a printer or keyboard. Use the X90 interface to connect
headphones.
You can fasten the USB and PROFINET connecting cables to the rear panel of the HMI device
with cable ties.
To Next Page
Loading...
