Technical specifications
5.2 Certificates and approvals
Comfort Panels INOX PCT
38 Compact Operating Instructions, 07/2021, A5E38804191-AE
ATEX/IECEx approval
Notes on use in hazardous areas
Observe the following FAQ regarding the use of an HMI device in hazardous areas: ATEX-FAQ
(https://support.industry.siemens.com/cs/ww/en/view/291285
)
When using the device in hazardous areas, ensure that all plugs connected to the device are
secured in a captive manner, see section "Securing cables for use in hazardous areas
(Page 29)".
You can find more information about explosion protection, EC/EU declarations of conformity
and other certificates on the Internet at the following address:
Certificates for Comfort Panels
(http://support.automation.siemens.com/WW/view/en/47182890/134200
)
ATEX approval
For an HMI device with "Ex" marking, the following approvals apply according to the
following standards.
• Standards:
– EN IEC 60079-0:2018
– EN IEC 60079-7:2015 +A1:2018
– EN 60079-31:2014
• Approvals:
IECEx approval
For an HMI device with "IECEx" marking, the following approvals apply according to the
following standards.
• Standards:
– IEC 60079-0:2017
– IEC 60079-7:2017
– IEC 60079-31:2013
• Approvals:
To Next Page
Loading...
