Siemens SIMATIC USB-Prommer User Manual

USB-Prommer
8 Commissioning Manual, 04/2020, A5E50041544-AA
Software Installation
3
The installation of the SIMATIC USB-Prommer software starts automatically after inserting
the product CD.
If this function is switched off, follow these steps:
1. Insert your SIMATIC USB-Prommer product CD into the CD-ROM drive
2. Open the root directory in this drive.
3. Start the setup program with a double-click on the "setup.exe" file.
The setup program will guide you through the entire installation. Observe the notes regarding
the installation and use of the SIMATIC USB-Prommer software in the Readme file that is
located in the root directory of the CD.

Siemens SIMATIC USB-Prommer Specifications

General

Brand	Siemens
Model	SIMATIC USB-Prommer
Category	Switch
Language	English