Siemens SIMATIC Operating Manual

Software description
3.4 Screen saver - IPCScreenSaver
PDT IFP Monitor Standard
22 Operating Manual, 10/2017, A5E41104536-AB
Procedure
1. Open the Configuration Center and go to the "Screen Saver" tab.
2. Select "Activate 'IPCScreenSaver' screen saver".
3. Set the desired "Brightness" for all the connected devices during the activity of the screen
saver using the slider or the "-" and "+" buttons.
Does not apply to IFP Ethernet monitors: If you set the value "0%" as the "Brightness",
the backlighting of the display is disabled.
4. Does not apply to Windows 10: With the "Screen saver transparent, desktop visible"
option, the window is transparent and a static screen of the desktop is visible.
5. If needed, select "Wake up with 100% brightness". After the screen saver is switched off,
the screens of all connected devices are operated with 100% brightness.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)