Siemens SIMATIC - Page 22

Configuration
2.4 Configuration and Parameter Assignment
ET 200pro Distributed I/O System - Fail-Safe Modules
22 Operating Instructions, 05/2007, A5E00394073-02
Parameter Description
You will find a description of assignable fail-safe electronic module parameters in this
manual.
PROFIsafe Address and PROFIsafe Address Assignment
You will find a description of the PROFIsafe address and the procedure for assigning the
address in this manual.
See also
Assignment of PROFIsafe Address (Page 24)
Parameters for the 8/16 F-DI DC24V PROFIsafe Electroni
c Module (Page 59)
Parameters for the 4/8 F-DI/4 F-DO DC24V/2 A PROFIsafe Elec
tronic Module (Page 92)
Parameters for the F-Switch PROFIsafe Electronic Module (Page 110)