ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
3
Preface
Purpose of this Manual
The information in this manual is a reference source for operations, function descriptions,
and technical specifications of the fail-safe modules of the ET 200pro distributed I/O system.
Basic Knowledge Requirements
This manual is a supplement to the
ET 200pro Distributed I/O System
manual. Working with
this manual requires general knowledge of automation engineering. Knowledge of the
STEP 7
basic software and the ET 200pro distributed I/O system is also required.
Scope of this Manual
Module Order Number Release Number
and Higher
CM IO 16xM12 fail-safe connection module for
EM 8/16 F-DI electronic module
6ES7 194-4DD00-0AA0 01
CM IO 12xM12 fail-safe connection module for
EM 4/8 F-DI/4 F-DO electronic module
6ES7 194-4DC00-0AA0 01
CM F-IO 2×M12 fail-safe connection module for F-
Switch PROFIsafe
6ES7 194-4DA00-0AA0 01
EM 8/16 F-DI DC24V PROFIsafe fail-safe digital
electronic module
6ES7-148-4FA00-0AB0 01
EM 4/8 F-DI/4 F-DO DC24V/2A PROFIsafe fail-safe
digital electronic module
6ES7 148-4FC00-0AB0 01
F-Switch PROFIsafe fail-safe digital electronic
module
6ES7 148-4FS00-0AB0 01
What's New
Compared with the previous version, this manual includes the following major
changes/additions:
● F-Switch PROFIsafe digital electronic module
To Next Page
Loading...
