Product Overview
1.2 Application of ET 200pro fail-safe modules
ET 200pro Distributed I/O System - Fail-Safe Modules
14 Operating Instructions, 05/2007, A5E00394073-02
1.2 Application of ET 200pro fail-safe modules
Possible Applications of ET 200pro With Fail-Safe Modules
The use of ET 200pro with fail-safe modules enables conventional safety engineering
designs to be replaced with PROFIBUS DP/PROFINET IO components. This includes
replacement of switching devices for emergency stop, protective door monitors and two-
hand operation.
Use in F-Systems
ET 200pro fail-safe modules can be used:
● In the S7 Distributed Safety F-system with the
S7 Distributed Safety
V 5.1 or higher and
F-Configuration Pack
V 5.4 or higher optional packages
The following manuals are applicable to the use of ET 200pro fail-safe modules in F-
systems:
●
ET 200pro Distributed I/O Device
●
Safety Engineering in SIMATIC S7
●
S7 Distributed Safety, Configuring and Programming
To Next Page
Loading...
