General Technical Specifications
6.1 Standards and Approvals
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
41
Use in Industrial Environment
SIMATIC products are designed for use in industrial environments.
Requirement for Area of Application
Emitted Interference Interference Immunity
Industry EN 61000-6-4 EN 61000-6-2
Use in Residential Areas
If you are using the ET 200pro in residential areas, you must ensure compliance with limit
class B for emission of radio interference in accordance with EN 61000-6-4.
Suitable measures for achieving a limit class B radio interference level are:
● Installation of the ET 200pro in grounded control cabinets/control boxes
● Use of filters in supply lines
TÜV Certificate and Standards
Fail-safe modules are certified to the following standards. Refer to the report accompanying
the TÜV certificate for the current version/edition of the standard.
Standard/Directive Designation
IEC 61508-1 to 7 Standards/Directives for Functional Safety
prEN 50159-1 and 2
VDI/VDE 2180-1 to 5
NE 31
Standards/Directives for Process Engineering
ISA S 84.01
IEC 62061
98/37/EC
EN 60204-1
EN/ISO 954-1/13849-1
Standards/Directives Machine Safety
prEN 954-2
DIN VDE 0116, Clause 8.7
prEN 50156-1
EN 230, Clause 7.3
EN 298, Clauses. 7.3, 8, 9, and 10
Standards/Directives for Burner Management
Systems
DIN V ENV 1954 (stop to position)
DIN VDE 0110-1
DIN VDE 0160
93/68/EEC
92/31/EEC and 93/68/EEC
DIN EN 55011 (stop to position)
EN 50081-2 (stop to position)
EN 61000-6-2
Additional Standards/Guidelines
DIN EN 61131-2
The current TÜV certificate report is available for downloading on the Internet at
https://support.automation.siemens.com under "Product Support".
To Next Page
Loading...
Need help?
General
