1PH7/2-35
Siemens AG, 2004. All rights reserved
Induction Motors, 1PH7 (APH7S) – 05.04 Edition
Technical Data and Characteristics
2.1 Technical data
For a description of the codes used in the table header, refer to Table 2-3. s with a
gray background are core types additional information on the order designation
(MLFB), refer to Section 1.4 or Catalog NC 60.
Table 2-1 Technical data 1PH7
Order
designation
1PH7
P
N
[kW]
n
N
[RPM]
n
max
1)
[RPM]
M
N
[Nm]
I
N
[A]
Increased
n
max
RPM
I
0
A
U
N
V
J
[kgm
2
]
Shaft height 100 mm
1PH7101-NF 3.7 1500 9000 24 10 12000 5.9 350 0.017
1PH7103-ND 3.7 1000 9000 35 10 12000 4.8 343 0.017
1PH7103-NF 5.5 1500 9000 35 13 12000 5.4 350 0.017
1PH7103-NG 7.0 2000 9000 33 17.5 12000 8.3 343 0.017
1PH7105-NF 7.0 1500 9000 45 17.5 12000 9.4 346 0.029
1PH7107-ND 6.25 1000 9000 60 17.5 12000 8.9 319 0.029
1PH7107-NF 9.0 1500 9000 57 23.5 12000 11.0 336 0.029
1PH7107-NG 10.5 2000 9000 50 26 12000 12.2 350 0.029
Shaft height 132 mm
1PH7131-NF 11 1500 8000 70 24 10000 8.4 350 0.076
1PH7133-ND 12.0 1000 8000 115 30 10000 12.7 336 0.076
1PH7133-NF 15 1500 8000 95 34 10000 14.0 346 0.076
1PH7133-NG 20.0 2000 8000 95 45 10000 17.4 350 0.076
1PH7135-NF 18.5 1500 8000 118 42 10000 17.0 350 0.109
1PH7137-ND 17.0 1000 8000 162 43 10000 18.5 322 0.109
1PH7137-NF 22.0 1500 8000 140 57 10000 22.8 308 0.109
1PH7137-NG 28.0 2000 8000 134 60 10000 21.4 350 0.109
2
To Next Page
Loading...
Need help?
General