Commissioning
4.4 Setting up a STEP 7 project
Connecting the SIMODRIVE 611U to the Technology CPU
Product Information, 03/2008, A5E00272066-05
59
The lower window half of the dialog shows the technology objects that have been configured
in S7T Config or are present as standard, but for which no TO DB exists. If necessary,
change the data block numbers of the TO DBs and click Create to generate the DBs.
Figure 4-40 Create TO DBs
If TO DBs have been generated for the existing technology objects, they will be displayed in
the upper window half of the "Technology Objects Management". The tool can now be
closed.
To Next Page
Loading...
