Assembly drawings/dimension sheets
9.2 Dimension drawing 1FK2x05 ... 1FK2x10
1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB
115
In the DT CONFIGURATOR - you can simply and quickly find
● dimension drawings
● 2D/3D CAD data
The DT CONFIGURATOR supports you when generating plant/system documentation
regarding project-specific information.
he 3D model in the DT CONFIGURATOR is a simplified representation that does not show
You can find further information on the Internet at DT CONFIGURATOR
(http://siemens.de/dt-konfigurator):
Recency of dimension drawings
Note
Changing motor dimensions
Siemens AG reserves the right to change the dimensions of the motors as part of
mechanical design improvements without prior notice. This means that dimension drawings
can become out
of date.
To Next Page
Loading...
Need help?
General
