1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB
3
For configuring, you require Catalog NC 82
(https://support.industry.siemens.com/cs/ww/en/view/109746977) as print version or online.
This documentation addresses project planners and project engineers as well as machine
manufacturers and commissioning engineers.
The Configuration Manual enables the target group to apply the rules and guidelines to be
observed when configuring products and systems.
The Configuration Manual supports you with selecting motors, calculating the drive
components, and selecting the required accessories. The Configuration Manual helps the
target group to create a system or plant configuration.
Planning and configuration phase
Information on the following topics is available at:
● Ordering documentation / overview of documentation
● Additional links to download documents
● Using documentation online (find and search in manuals / information)
More information (https://support.industry.siemens.com/cs/ww/en/view/108998034)
If you have any questions regarding the technical documentation (e.g. suggestions,
corrections), please send an e-mail to the following address:
E-mail (mailto:docu.motioncontrol@siemens.com)
To Next Page
Loading...
