Siemens SIMOTICS S-1FK2 Service Manual

4. Enter parameter 4690 into the list.


① Parameter
② "Add" to transfer into the list
Enter component number ② from the alarm message into the "value" column, in this
example it is "7".


① Parameter
② Number of the component without motor data from the alarm message
5. Switch o󹪜 the CU and switch on again (POWER OFF -> POWER ON).
Start the write operation: Enter p4691 = 2
Setting p4691 = 2 starts the transfer of the electronic rating plate from the storage medium of
the converter into the encoder of the motor with the component number from p4690.
Description
2.4 Encoder replacement variants
Encoder replacement for SIMOTICS S-1FK2 and S-1FT2
38 Service Manual, 07/2022, A5E52211160B AA

Siemens SIMOTICS S-1FK2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FK2
Category	Engine
Language	English