Siemens SIMOTICS S-1FT2 User Manual

WARNING
Unexpected movement of machines caused by inactive safety functions
Inactive or non-adapted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
• Observe the information in the appropriate product documentation before commissioning.
• Carry out a safety inspection for functions relevant to safety on the entire system, including
all safety-related components.
• Ensure that the safety functions used in your drives and automation tasks are adjusted and
activated through appropriate parameterizing.
• Perform a function test.
• Only put your plant into live operation once you have guaranteed that the functions
relevant to safety are running correctly.
Note
Important Safety instructions for Safety Integrated
If you want to use Safety Integrated functions, you must observe the Safety instructions in the
Safety Integrated documentation.
WARNING
Active implant malfunctions due to electromagnetic 󹪝elds
Electromagnetic 󹪝elds (EMF) are generated by the operation of electrical power equipment,
such as transformers, converters, or motors. People with pacemakers or implants are at
particular risk in the immediate vicinity of this equipment.
• If this a󹪜ects you, maintain the minimum distance to such equipment that is speci󹪝ed in the
"Important product information" chapter.
WARNING
Active implant malfunctions due to permanent-magnet 󹪝elds
Even when switched o󹪜, electric motors with permanent magnets represent a potential risk for
persons with heart pacemakers or implants if they are close to converters/motors.
• If this a󹪜ects you, maintain the minimum distance to such equipment that is speci󹪝ed in the
"Important product information" chapter.
• When transporting or storing permanent-magnet motors always use the original packing
materials with the warning labels attached.
• Clearly mark the storage locations with the appropriate warning labels.
• IATA regulations must be observed when transported by air.
Fundamental safety instructions for the SIMOTICS documentation
2.1Fundamental safety instructions
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
18 Operating Instructions, 12/2023, A5E50610821B AF

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English