Siemens SIMOTICS S-1FT2 User Manual

Figure5-1 Lifting and transporting with lifting slings (example diagram)
Procedure for lifting and transporting using lifting eye bolts
For the 1FT2☐08 and 1F☐2☐10 motors, you can use lifting eye bolts and a crossbar for lifting
and transporting.
WARNING
Incorrect or unused attachment points
Due to incorrect or unused attachment points, the motor can fall and cause death, severe injury
and/or damage to property.
• Only lift and transport larger motors using the lifting eye bolts screwed on to the end
shields.
• Completely screw in the lifting eye bolts and tighten by hand (approx. 8Nm).
• Do not use bent or damaged lifting eye bolts.
• Only use lifting eye bolts with laminated 󹪝ber washers.
• It is not permissible to apply loads transversely to the plane of the lifting eye bolts.
Preparing for use
5.2Transportation and storage
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
60 Operating Instructions, 12/2023, A5E50610821B AF

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English