Preparing for use
3.2 Transportation and storage
Planetary gearboxes for servomotors
Operating Instructions, 09/2020, A5E50494253B AA
31
Lifting using eyebolts or lifting eyes
Unintentional change of the geared motor position
If you lift and transport the geared motor using eyebolts or lifting eyes, as an unfavorable
center of gravity situation of the geared motor can unintentionally change the position and
cause severe injury.
• Screw the eyebolts for lifting and transporting into the threaded bores depending on the
specific position.
Do not attach any additional loads to the geared motor.
Use a crossbar for lifting and transporting the geared motor.
Figure 3-1 Transporting using a crossbar (example)
To Next Page
Loading...
