Siemens SINAMICS G120C Compact Operating Instructions

Scope of delivery and options
2.1 Inverters, frame sizes FSD … FSF
SINAMICS G120C, FSD ... FSF inverters
10 Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
Type plate and technical data
The rating plate contains the Article No. and the hardware and
firmware version of the inverter. You will find a rating plate at
the following locations on the inverter:
• At the front, after removing the blanking cover for the opera-
tor panel.
• At the side on the heat sink

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating