Installation
3.6 Connections and cable for the SINAMICS G120D
Getting Started
28 Getting Started, FW V4.5, A5E03404762A AB
Cable lengths
The maximum cable lengths for all the inverters are shown in the table below.
Table 3- 4 Maximum cable lengths
Cable Screening Max. length
Screened 15 m (49 ft) Motor*
Unscreened 30 m (98 ft)
Screened 15 m (49 ft) Temperature sensor*
Unscreened 30 m (98 ft)
Screened 15 m (49 ft) Brake*
Unscreened 30 m (98 ft)
Digital inputs Unscreened 30 m (98 ft)
Digital outputs Unscreened 30 m (98 ft)
Analog input Unscreened 30 m (98 ft)
Encoder (SSI and HTL) Screened 30 m (98 ft)
*The motor, temperature sensor and brake connections are all carried in a single cable which is
connected to the Power Module using a Harting connector.
To Next Page
Loading...
