Siemens SINAMICS G120P CU230P-2 - Page 18

Installing
3.5 Default setting of the interfaces
CU230P-2 Control Units
18 Compact Operating Instructions, 01/2017, A5E38815802B AA
Default setting 14: "Process industry with fieldbus"
DO 0: p0730, DO 1: p0731
AO 0: p0771[0], AO 1: p0771[1]
DI 0: r0722.0, …, DI 5: r0722.5
Motorized potentiometer, setpoint after the ramp-function generator: r1050
Speed setpoint (main setpoint): p1070[0] = 2050[1], p1070[1] = 1050
Designation in the BOP-2: Proc Fb