2.2 Visual inspection
The visual inspection is performed to ensure that the equipment complies with the order
specifications. The tests are carried out with the drive in a no-voltage condition.
The visual inspection together with the customer – or with the company accepting the
equipment – is carried out with the drive installed and labeled. Each test step is documented in
the acceptance report with the specific results of the step.
The visual inspection is part of the function test (F72, F73).
Visual inspection Order codes
Without the
customer
present
With the cus‐
tomer
present
● Rating plate
● Housing degree of protection
● Electrical cabinet components
● Cable installation
● Cable markings
● Setting values of circuit breakers, if used
● Dimensions
-
F03
See also
Visual inspection (Page 18)
General scope of services
2.2 Visual inspection
SINAMICS SL150 6SL3865 F03 F70 F98 F79 F76
12 Reference Manual Rev.201902141427 SL150 wassergekühlt
To Next Page
Loading...
